Rolled Sheet
We can define the milled roll steel product as follows: Milled roll steel products are the milled versions of products produced in roll form according to customer requests, milled on the milling line to the desired dimensions. Products are packaged and prepared for delivery either on vertical or horizontal pallets, or pallet‑less, according to customer requests.
HC Yassımetal, a leader in the sector, produces high‑quality products tailored to customer needs. Milled roll steel products can also be found as painted milled roll steel products upon request.
In these products, as with milled roll steel products, they are milled on the milling line into sliced forms according to customer needs. Milling operations on the milling lines can be performed up to approximately 20 mm.
Packaging, as previously mentioned, can be done in flat or vertical orientation. The milling operation is generally performed between 0.20 mm and 3.00 mm.
Galvanized steel products can be milled within various width ranges according to customer requests. At this point, customer demands, needs, and requests are extremely important.
These products, produced according to customer requests, can be milled up to approximately 20 mm width. At this point, we need to discuss the characteristics of milled roll steel products.
What are the characteristics of milled roll steel? Roll production is generally manufactured in thicknesses ranging from 0.20 mm to 3.00 mm.
The roll width ranges from a maximum of 1250 mm to a minimum of 30 mm, depending on that. The internal structure of the (milled) rolls averages 508 mm to 610 mm.
The rolls weigh at least 2 tons and at most 12 tons. The coatings are performed within the standards accepted by our country and the world.
Galvanized milled roll steel products are produced by hot‑dip galvanizing on continuous lines. Every point in the production process of our products is inspected.
Where are the applications of milled roll steel? Milled roll steel products have various applications.
We will list the areas where milled roll steel is most commonly preferred to help you: - Electrical conduit systems - Light steel structure profiles - Kinetic roof coating systems - Ventilation duct systems - Suspended ceiling profiles and duct systems - Solar energy system profiles - Exterior façade cladding products Besides all of these, general usage areas are as follows: - Used during the manufacturing of transport vehicles (train, ship, bus, truck, bicycle, etc.) - Preferred in the energy sector (wind energy production, solar energy production, energy transmission lines, etc.) - Preferred in the agricultural sector (used in the manufacturing of pipes preferred for agricultural machinery or channels that control water power; additionally, bridges, ports, tunnels, etc.) - Preferred in storage systems. - Used in the construction sector (can be used during the construction of load‑bearing columns, mixing, concrete transport, or steel buildings).
- Finally, it is preferred in hot and pressurized environments.